MODEL · FT-CFP-100G-LR4-2
100G CFP LR4 Dual Rate 10km Module
F-tone Networks FT-CFP-100G-LR4-2: 100G CFP LR4 dual-rate optical module, 103.1–111.8 Gbps, 10 km over single-mode fiber, LWDM, duplex LC, DDMI, 0–70 °C.
- 760
- mVpp
- 850
- mVpp
- Part No.
- Data Rate
- Laser
- Fiber Type
- Distance
- Optical Interface
- Temp
- DDMI
Reference model FT-CFP-100G-LR4-2 in your inquiry. Datasheets are confirmed offline before order. Full specifications ↓
Specifications
Technical parameters
| 760 | mVpp |
|---|---|
| 850 | mVpp |
| Part No. | Data Rate |
| Laser | Fiber Type |
| Distance | Optical Interface |
| Temp | DDMI |
| CFP-100G-LR4 | 103.1~111.8Gbps |
| LWDM | SMF |
| 10km | LC |
| 0~70C | Y |
| Storage Temperature | TS |
| Supply Voltage | VCC |
| Operating Relative Humidity | FH |
| Operating Case Temperature | TC |
| Power Supply Voltage | VCC |
| 3.135 | 3.3 |
| Maximum Power Dissipation | PD |
| Aggregate Bit Rate | BRAVE |
| 111.8 | Gb/s |
| Lane Bit Rate | BRLANE |
| 27.95 | Gb/s |
| Transmission Distance | TD |
| km | Over SMF |
| Center Wavelength Lane 0 | λ0 |
| 1294.53 | 1295.56 |
| Center Wavelength Lane 1 | λ1 |
| 1299.02 | 1300.05 |
| Center Wavelength Lane 2 | λ2 |
| 1303.54 | 1304.58 |
| Center Wavelength Lane 3 | λ3 |
| 1308.09 | 1309.14 |
| Total Launch Power, 100GE | PALL | – | – | 10.5 | dBm | 1 |
| Total Launch Power, OTU4 | PALL |
| 8.9 | 1 |
| Average Launch Power per Lane, 100GE | PTX_LANE | -4.3 | – | 4.5 | dBm | 1 |
| Average Launch Power per Lane, OTU4 | PTX_LANE | -2.5 | – | 2.9 | dBm | 1 |
| OMA per Lane, 100GE | OMA | -1.3 | – | 4.5 | dBm | 1 |
| OMA–TDP per Lane, 100GE | OMA_TDP |
| Extinction Ratio, 100GE | ER |
| Extinction Ratio, OTU4 | ER |
| Difference in launch power between lanes | PTX_DELTA_LANE |
| Average Output Power (Laser Turn off) | POUT-OFF |
| Side Mode Suppression Ratio | SMSR |
| Optical Eye Mask, 100GE | {0.25, 0.4, 0.45, 0.25, 0.28, 0.4} Compliant with IEEE 802.3ba | 2 |
| Optical Eye Mask, OTU4 | {0.25, 0.4, 0.45, 0.25, 0.28, 0.4} Compliant with ITU-T G.959.1 | 2 |
| Average Rx Power per Lane, 100GE | PRX _LANE | -10.6 | 4.5 | dBm |
| OMA Sensitivity per Lane, 100GE | POMA_LANE | – | – | -8.6 | dBm | 3 |
| Average Rx Power per Lane, OTU4 | PRX_AVE_LANE | -8.8 | 2.9 | dBm |
| Sensitivity per Lane, OTU4 | PRX_AVE_LANE | – | – | -10.3 | dBm | 4 |
| Damage Threshold | Pdamage |
| Receiver Reflectance | FL |
| Differential Data Input Amplitude | VIN,P-P |
| Differential Termination Mismatch | – | – | 5 | % |
| Tx_Disable | Normal Operation | VIL | -0.3 | – | 0.8 | V |
| Laser Disable | VIH |
| Differential Data Output Amplitude | VOUT,P-P |
| Differential Termination Mismatch（1MHZ） | – | – | 5 | % |
| Output Rise/Fall Time, 20%~80% | TR |
| Rx_LOS | Normal Operation | VOL | – | – | 0.2 | V |
| Lose Signal | VOH |
| Temperature | 0 to 70 | ±3 | ºC | Internal |
| Voltage | 0 to VCC | ±3 | V | Internal |
| Tx Bias Current Per Lane | 0 to 100 | ±10% | mA | Internal |
| Tx Output Power Per Lane | -4.3 to 4.5 | ±3 | dB | Internal |
| Rx Power (Each Lane) | -10.6 to 4.5 | ±3 | dB | Internal |
Overview
Product details
Overview
The FT-CFP-100G-LR4-2 is a 100G CFP optical transceiver that operates at both 100GE and OTU4 line rates, covering 103.1 to 111.8 Gbps. Four LWDM lanes in the 1295 to 1310 nm band carry the traffic up to 10 km over standard single-mode fiber through a duplex LC connector. The module takes a 3.3 V supply with maximum power dissipation of 12 W, and it works from 0 to 70 °C for typical equipment rooms. Digital diagnostics monitoring tracks temperature, voltage, bias current and optical power on each lane, giving operators live visibility into link health without extra test gear.
Key Features
- Dual-rate operation: 103.1–111.8 Gbps (100GE and OTU4)
- Four LWDM lanes, 1295–1310 nm, over single-mode fiber
- 10 km reach with duplex LC connector
- Digital diagnostics monitoring per lane (temperature, voltage, bias, optical power)
- 3.3 V supply, maximum 12 W dissipation
- 0–70 °C operating case temperature
Applications
- 100G data center interconnects
- Telecom OTN and OTU4 transport links
- Campus and metro 100GE backbone
- Service provider edge and aggregation
Specifications
| Part Number | FT-CFP-100G-LR4-2 |
| Form Factor | CFP |
| Data Rate | 103.1–111.8 Gb/s (dual rate, 100GE / OTU4) |
| Transmitter | 4 × LWDM, 1295–1310 nm |
| Center Wavelengths (typical) | 1295.56 / 1300.05 / 1304.58 / 1309.14 nm |
| Fiber Type | Single-mode fiber (SMF) |
| Transmission Distance | 10 km |
| Optical Connector | Duplex LC |
| Operating Temperature | 0 to 70 °C |
| Supply Voltage | 3.3 V |
| Maximum Power Dissipation | 12 W |
| Digital Diagnostics | Yes (DDMI) |
Contact
For pricing, datasheets and OEM/ODM inquiries, contact the F-tone Networks sales team: una@f-tone.com / betty@f-tone.com · WhatsApp: +86 17761163895
Related products
View all Optical Transceivers →More in Optical Transceivers
FT-62
10-Pin Miniature Single-Channel Optical Module
View details →
FT-37
10Mbps 1x9 1550nm Dual-Fiber Transceiver, SC/FC/ST
View details →
FT-10M-11
10Mbps TTL Single-Mode Duplex Fiber Transceiver
View details →
FT-SFP-10M
TTL SFP Duplex LC SM 1310nm 20km Transceiver
View details →
FT-QSFP-8LC-AOC10M
10m 40G QSFP+ to 4x10G SFP+ Breakout AOC
View details →
FT-100964
10m Simplex OS2 LC UPC Patch Cable, LSZH 2.0mm
View details →
FT-QSFPPLUS-10M
10m 40G QSFP+ Active Copper Cable, Juniper
View details →
FT-QSFP-40G-AC10M
10m 40G QSFP+ Active DAC Cable, Juniper QFX
View details →
FT-QSFPPLUS-10M-2
10m 40G QSFP+ Active Copper Cable, Gigamon
View details →
FT-100569
10m 10G SFP+ Passive DAC Twinax, Intel Compatible
View details →
FT-QSFPPLUS-10G-10M-BRK
10m 40G QSFP+ to 4x SFP+ Breakout AOC
View details →
FT-103119
10m MPO-24 to 12x LC Duplex Breakout, OM4 Elite
View details →
FT-QSFP28-4SFP28-AOC10M
10m 100G QSFP28 to 4x25G SFP28 Breakout AOC
View details →
FT-103313
10m MPO-24 to 12x LC Duplex Breakout, OM3 Elite
View details →
FT-103189
10m MPO-24 Female OM3 Trunk, 24F Type B LSZH
View details →
FT-103372