MODEL · FT-QSFP28-100G-SR4-850-2
100G QSFP28 SR4 850nm 100m Optical Transceiver
F-tone Networks FT-QSFP28-100G-SR4-850-2: 100G QSFP28 SR4 module, 850 nm MPO-12 parallel optics, 100 m OM4 / 70 m OM3 for dense fabrics with low power.
- 850
- 860
- 2850
- mV
- Storage Temperature Range
- TSTG | -40 | +85 | ⁰C
- Supply Voltage
- VCC | 0 | 4 | V
- Relative Humidity
- FH | 5%to 85% non-condensing
- Case Temperature-Operating
- TCASE | 0 | 70 | ⁰C
Reference model FT-QSFP28-100G-SR4-850-2 in your inquiry. Datasheets are confirmed offline before order. Full specifications ↓
Specifications
Technical parameters
| 850 | 860 |
|---|---|
| 2850 | mV |
| Storage Temperature Range | TSTG | -40 | +85 | ⁰C |
| Supply Voltage | VCC | 0 | 4 | V |
| Relative Humidity | FH | 5%to 85% non-condensing |
| Case Temperature-Operating | TCASE | 0 | 70 | ⁰C |
| Power Consumption | PDI SS |
| Link Distance over OM4 Fiber | 100 | M |
| Link Distance over OM3 Fiber | 70 | M |
| Transmitter Parameter | Min | Typical | Max | Units |
| Signaling Rate,each lane | 25.78125 ± 100ppm | Gbps |
| Center Wavelength Range | 840 | 850 | 860 | nm |
| Modulation Format | NRZ |
| Average launch Power per lane | -8.4 |
| FMS spectral width | 0.6 | nm |
| Optical Modulation Amplitude ,each lane | -6.4 |
| Average Launch Power per Lane @TX Off State | -30.0 | dBm |
| Launch Power in OMA minus TDEC,each Lane | -7.3 | dBm |
| Transmitter and Dispersion Eye Closure,each Lane | 4.3 | dB |
| Extinction Ratio | 2.0 | dB |
| Optical Return Loss Tolerance | 12 | dB |
| Transmitter Eye mask definition {X1, X2,X3,Y1,Y2,Y3} | {0.3,0.38,0.45,0.35,0.41,0.5} |
| Receiver Parameter | Min | Typical | Max | Units |
| Lane Wavelength Range | 840 |
| Damage Threshold | 3.4 | dBm |
| Average Receive Power,each lane | – 10.3 |
| Receiver Power,each lane (OMA) | 3.0 | dBm |
| Receiver Reflectance | – 12.0 | dB |
| Stressed Receiver Sensitivity (OMA),each lane | -5.2 | dBm |
| Stressed Eye Closure | 4.3 | dB |
| stressed Eye J2Jitter | 0.39 | UI |
| stressed Eye J4Jitter | 0.53 | UI |
| OMA of each aggressor lane | 3 | dBm |
| Stressed Receiver Eye Mask Definition {X1,X2,X3,Y1,Y2,Y3} | {0.28,0.5,0.5,0.33,0.33,0.4} |
| FX_LOS_Assert Min/Max | -30.0 | dBm |
| FX_LOS_De-Assert Min/Max | – 12.0 | dBm |
| FX_LOS_Hysteresis | 0.5 | dB |
| Signaling rate per lane (range) | 25.78125 ± 100ppm | GBd |
| AC common-mode output voltage (FMS) | 17.5 | mV |
| Differential output voltage | 900 | mV |
| Eye width | 0.57 | UI |
| Eye height,differential | 228 | mV |
| Vertical eye closure | 5.5 | dB |
| Differential output return loss | Equation (83E– 2) | dB |
| Common to differential mode conversion return loss | Equation (83E– 3) | dB |
| Differential termination mismatch | 10 | % |
| Transition time (20%to 80%) | 12 | ps |
| DC common mode voltage | -350 |
| Transition time ( 20%to 80%) | 12 | ps |
| Product Number | Data Rate(Gb/s) | Wavelength(nm) | Reach(km) | LD | Tx Power(dBm) | PD | Rx Sens(dBm) | Temperature(℃) |
| FQ-100G-SR4 | 100 | 850nm | 0.1 | VCSEL | -8.4~2.4 | PIN | <-10.3 | 0~70 |
Overview
Product details
Overview
The FT-QSFP28-100G-SR4-850-2 is a 100G QSFP28 SR4 optical transceiver built on 4-lane 850 nm parallel optics with an MPO-12 connector. Each lane runs 25.78125 Gbps NRZ, reaching 100 m over OM4 and 70 m over OM3 multimode fiber. Center wavelength spans 840 to 860 nm, and average launch power per lane is -8.4 to 2.4 dBm. Power consumption stays at 2.5 W within a 0 to 70 °C case temperature range. The parallel-optics design suits high-density data center fabrics where one cable plant carries 100G natively.
Key Features
- 4 x 25.78125 Gbps NRZ lanes over 850 nm VCSEL array
- MPO-12 parallel optics connector
- 100 m reach over OM4, 70 m over OM3 multimode fiber
- Center wavelength 840 to 860 nm
- Average launch power -8.4 to 2.4 dBm per lane
- 2.5 W power consumption; case temperature 0 to 70 °C
Applications
- Data center spine-leaf fabrics
- High-density top-of-rack connections
- Enterprise core short-reach links
Specifications
| Part Number | FT-QSFP28-100G-SR4-850-2 |
| Form Factor | QSFP28 |
| Data Rate | 100 Gb/s |
| Transceiver Type | SR4 |
| Wavelength | 840 to 860 nm (850 nm nominal) |
| Distance | 100 m OM4 / 70 m OM3 |
| Fiber Type | Multimode |
| Connector | MPO-12 |
| Modulation | NRZ |
| Lane Data Rate | 25.78125 Gbps |
| Average Launch Power per Lane | -8.4 to 2.4 dBm |
| Extinction Ratio | 2.0 dB |
| Power Consumption | 2.5 W |
| Operating Case Temperature | 0 to 70 °C |
Contact
For pricing, datasheets and OEM/ODM inquiries, contact the F-tone Networks sales team: una@f-tone.com / betty@f-tone.com · WhatsApp: +86 17761163895
Related products
View all Optical Transceivers →More in Optical Transceivers
FT-62
10-Pin Miniature Single-Channel Optical Module
View details →
FT-37
10Mbps 1x9 1550nm Dual-Fiber Transceiver, SC/FC/ST
View details →
FT-10M-11
10Mbps TTL Single-Mode Duplex Fiber Transceiver
View details →
FT-SFP-10M
TTL SFP Duplex LC SM 1310nm 20km Transceiver
View details →
FT-QSFP-8LC-AOC10M
10m 40G QSFP+ to 4x10G SFP+ Breakout AOC
View details →
FT-100964
10m Simplex OS2 LC UPC Patch Cable, LSZH 2.0mm
View details →
FT-QSFPPLUS-10M
10m 40G QSFP+ Active Copper Cable, Juniper
View details →
FT-QSFP-40G-AC10M
10m 40G QSFP+ Active DAC Cable, Juniper QFX
View details →
FT-QSFPPLUS-10M-2
10m 40G QSFP+ Active Copper Cable, Gigamon
View details →
FT-100569
10m 10G SFP+ Passive DAC Twinax, Intel Compatible
View details →
FT-QSFPPLUS-10G-10M-BRK
10m 40G QSFP+ to 4x SFP+ Breakout AOC
View details →
FT-103119
10m MPO-24 to 12x LC Duplex Breakout, OM4 Elite
View details →
FT-QSFP28-4SFP28-AOC10M
10m 100G QSFP28 to 4x25G SFP28 Breakout AOC
View details →
FT-103313
10m MPO-24 to 12x LC Duplex Breakout, OM3 Elite
View details →
FT-103189
10m MPO-24 Female OM3 Trunk, 24F Type B LSZH
View details →
FT-103372