MODEL · FT-CFP2-100G-ER4-2
100G CFP2 ER4 Dual Rate 40km Module
F-tone Networks FT-CFP2-100G-ER4-2: 100G CFP2 ER4 dual-rate optical module, 103.1–111.8 Gbps, 40 km over single-mode fiber, LWDM, duplex LC, DDMI, 0–70 °C.
- 900
- mVpp
- Part No.
- Data Rate
- Laser
- Fiber Type
- Distance
- Optical Interface
- Temp
- DDMI
- CFP2-100G-ER4
- 103.1~111.8Gbps
Reference model FT-CFP2-100G-ER4-2 in your inquiry. Datasheets are confirmed offline before order. Full specifications ↓
Specifications
Technical parameters
| 900 | mVpp |
|---|---|
| Part No. | Data Rate |
| Laser | Fiber Type |
| Distance | Optical Interface |
| Temp | DDMI |
| CFP2-100G-ER4 | 103.1~111.8Gbps |
| LWDM | SMF |
| 40km | LC |
| 0~70C | Y |
| Storage Temperature | TS |
| Supply Voltage | VCC |
| Operating Relative Humidity | FH |
| Operating Case Temperature | TC |
| Power Supply Voltage | VCC |
| 3.13 | 3.3 |
| Maximum Power Dissipation | PD |
| Aggregate Bit Rate | BRAVE |
| 111.8 | Gb/s |
| Lane Bit Rate | BRLANE |
| 27.95 | Gb/s |
| Transmission Distance | TD |
| km | Over SMF |
| Center Wavelength Lane 0 | λ0 |
| 1294.53 | 1295.56 |
| Center Wavelength Lane 1 | λ1 |
| 1299.02 | 1300.05 |
| Center Wavelength Lane 2 | λ2 |
| 1303.54 | 1304.58 |
| Center Wavelength Lane 3 | λ3 |
| 1308.09 | 1309.14 |
| Total Launch Power, 100GE | PALL | – | – | 8.9 | dBm | 1 |
| Average Launch Power per Lane, 100GE | PTX_LANE | -2.9 | – | 2.9 | dBm | 1 |
| OMA per Lane, 100GE | OMA |
| Difference in launch power between lanes | PTX_DELTA_LANE |
| Total Launch Output Power, OTU4 | PALL | – | – | 8.9 | dBm | 1 |
| Average Launch Power per Lane, OTU4 | PTX_LANE | -2.7 | – | 2.9 | dBm | 1 |
| Average Output Power (Laser Turn off) | POUT-OFF |
| Side Mode Suppression Ratio | SMSR |
| Extinction Ratio, 100GE/ OTU4 | ER |
| Optical Eye Mask, 100GE | Compliant with IEEE 802.3ba | 2 |
| Optical Eye Mask, OTU4 | Compliant with ITU-T G.959.1 | 2 |
| Average Rx Power per Lane, 100GE | PRX _LANE | -20.9 | 4.5 | dBm |
| OMA Sensitivity per Lane, 100GE | POMA_LANE | – | – | -20.4 | dBm | 3 |
| Average Rx Power per Lane, OTU4 | PRX_AVE_LANE | -20.7 | 4.5 | dBm |
| Sensitivity per Lane, OTU4 | PRX_AVE_LANE | – | – | -22.2 | dBm | 4 |
| Receiver Damage | Pdamage |
| Differential Data Input Amplitude | VIN,P-P |
| Differential Termination Mismatch | – | – | 10 | % |
| Tx_Disable | Normal Operation | VIL | -0.3 | – | 0.8 | V |
| Laser Disable | VIH |
| Differential Data Output Amplitude | VOUT,P-P |
| Differential Termination Mismatch（1MHZ） | – | – | 10 | % |
| Output Rise/Fall Time, 20%~80% | TR |
| Rx_LOS | Normal Operation | VOL | – | – | 0.2 | V |
| Lose Signal | VOH |
| Temperature | -5 to 70 | ±3 | ºC | Internal |
| Voltage | 0 to VCC | ±3% | V | Internal |
| Tx Bias Current Per Lane | 0 to 100 | ±10% | mA | Internal |
| Tx Output Power Per Lane | -2.9 to 2.9 | ±3 | dB | Internal |
| Rx Power (Each Lane) | -20.9 to 4.5 | ±3 | dB | Internal |
Overview
Product details
Overview
The FT-CFP2-100G-ER4-2 is a 100G CFP2 transceiver built for extended-reach links up to 40 km over single-mode fiber. It runs dual rate at 103.1 to 111.8 Gbps, covering both 100GE Ethernet and OTU4 transport on four LWDM lanes from 1295 to 1310 nm. The longer reach suits metro and regional spans that would otherwise need regeneration or amplification. Maximum power dissipation is 14 W from a 3.3 V supply, and the module operates from 0 to 70 °C. Per-lane digital diagnostics report temperature, voltage, bias current and optical power, supporting proactive maintenance on long-haul routes.
Key Features
- Dual-rate 103.1–111.8 Gbps (100GE and OTU4)
- 40 km extended reach over single-mode fiber
- Four LWDM lanes, 1295–1310 nm
- Per-lane digital diagnostics monitoring
- 3.3 V supply, 14 W maximum dissipation
- 0–70 °C operating case temperature
Applications
- Metro and regional 100G transport
- Data center interconnects beyond 10 km
- OTN backbone extension
- Carrier aggregation networks
Specifications
| Part Number | FT-CFP2-100G-ER4-2 |
| Form Factor | CFP2 |
| Data Rate | 103.1–111.8 Gb/s (dual rate, 100GE / OTU4) |
| Transmitter | 4 × LWDM, 1295–1310 nm |
| Center Wavelengths (typical) | 1295.56 / 1300.05 / 1304.58 / 1309.14 nm |
| Fiber Type | Single-mode fiber (SMF) |
| Transmission Distance | 40 km |
| Optical Connector | Duplex LC |
| Operating Temperature | 0 to 70 °C |
| Supply Voltage | 3.3 V |
| Maximum Power Dissipation | 14 W |
| Digital Diagnostics | Yes (DDMI) |
Contact
For pricing, datasheets and OEM/ODM inquiries, contact the F-tone Networks sales team: una@f-tone.com / betty@f-tone.com · WhatsApp: +86 17761163895
Related products
View all Optical Transceivers →More in Optical Transceivers
FT-62
10-Pin Miniature Single-Channel Optical Module
View details →
FT-37
10Mbps 1x9 1550nm Dual-Fiber Transceiver, SC/FC/ST
View details →
FT-10M-11
10Mbps TTL Single-Mode Duplex Fiber Transceiver
View details →
FT-SFP-10M
TTL SFP Duplex LC SM 1310nm 20km Transceiver
View details →
FT-QSFP-8LC-AOC10M
10m 40G QSFP+ to 4x10G SFP+ Breakout AOC
View details →
FT-100964
10m Simplex OS2 LC UPC Patch Cable, LSZH 2.0mm
View details →
FT-QSFPPLUS-10M
10m 40G QSFP+ Active Copper Cable, Juniper
View details →
FT-QSFP-40G-AC10M
10m 40G QSFP+ Active DAC Cable, Juniper QFX
View details →
FT-QSFPPLUS-10M-2
10m 40G QSFP+ Active Copper Cable, Gigamon
View details →
FT-100569
10m 10G SFP+ Passive DAC Twinax, Intel Compatible
View details →
FT-QSFPPLUS-10G-10M-BRK
10m 40G QSFP+ to 4x SFP+ Breakout AOC
View details →
FT-103119
10m MPO-24 to 12x LC Duplex Breakout, OM4 Elite
View details →
FT-QSFP28-4SFP28-AOC10M
10m 100G QSFP28 to 4x25G SFP28 Breakout AOC
View details →
FT-103313
10m MPO-24 to 12x LC Duplex Breakout, OM3 Elite
View details →
FT-103189
10m MPO-24 Female OM3 Trunk, 24F Type B LSZH
View details →
FT-103372