Plastic-Housing 8-Port 100M Switch
F-tone Networks Plastic-Housing 8-Port 100M Switch. Official parameters are typical values and must be confirmed in writing. Ask Betty or Una.
- Product type
- 100M Ethernet switch
- Port description
- 8 × 10/100M copper ports
- Input voltage
- DC 5V1A
- Power consumption
- Full load <3W
- MTBF
- 100,000 hours
- Operating / storage temperature
- -10℃~+70℃
Reference model FW-093-PLASTIC-HOUSING-8-PORT-100M-SWITCH in your inquiry. Datasheets are confirmed offline before order. Full specifications ↓
Technical parameters
| Product type | 100M Ethernet switch |
|---|---|
| Port description | 8 × 10/100M copper ports |
| Input voltage | DC 5V1A |
| Power consumption | Full load <3W |
| MTBF | 100,000 hours |
| Operating / storage temperature | -10℃~+70℃ |
| Relative humidity | 5%~95%(non-condensing) |
| Forwarding mode | Store-and-forward |
| Switching capacity | 1.6Gbps |
| Packet forwarding rate | 1.1904M bps |
| MAC address table | 1K |
| Buffer | 48K |
| Forwarding delay | <5us |
| Reverse polarity | Supported |
| Flow control | Supported |
| Jumbo frame | Supports 10KBytes |
| Network topology | Supports ring, star, bus, and tree topologies, among others |
| Network standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x |
| Protection rating | IP30 |
| Housing | Quality metal, strong heat dissipation |
| Housing dimensions | 122.14*54.34*24.5mm (L × W × H, excluding protrusions) |
| Weight | 0.18g/ unit |
| Note | The panel appearance is subject to the physical product |
Product details
F-tone Networks Plastic-Housing 8-Port 100M Switch is presented from the official source page. Official parameters below are typical values from the official source and must be confirmed in writing before any order.
The product is designed to Ethernet standards, with stable performance. It uses store-and-forward switching, automatically learns and updates MAC addresses, and is intended to improve network transmission and switching performance.It can automatically adapt to the network environment for easier installation and commissioning. The official source describes effective heat dissipation, low noise, and a long service life.It is described as plug-and-play switching. All ports support wire-speed forwarding and automatic MDI/MDIX crossover.Dynamic LED indicators provide simple working-status indication and troubleshooting.Ports can automatically identify straight-through and crossover cables, without special settings, so that data can take an optimal path during transmission.The official source states that this product is compatible with mainstream cameras and is widely used at the access layer of small and medium-sized networks, and is compatible with computers, printers, network cameras, and wireless APs. It can be extended to multimedia transmission systems, wireless network transmission, industry dedicated broadband networks, and other network equipment.It is also described as suitable for related data-transmission applications in enterprises, security, transportation, power grids, mining, water conservancy and oil fields, small businesses, internet cafes, hotels, and schools. Gigabit ports • 8 × 10/100Mauto-sensing RJ45 ports • All ports support wire-speed data forwarding • Supports automatic port crossover (Auto MDI/MDIX) • It has an anti-lockup monitoring auto-reset function and is suitable for heavy-load applications such as HD network cameras • It has a wide range of uses, including switch interconnection, computer interconnection, and surveillance-camera uplinks • Effective heat dissipation, low noise, and a long service life • White plastic housing, compact and portable
| Product type | 100M Ethernet switch |
|---|---|
| Port description | 8 × 10/100M copper ports |
| Input voltage | DC 5V1A |
| Power consumption | Full load <3W |
| MTBF | 100,000 hours |
| Operating / storage temperature | -10℃~+70℃ |
| Relative humidity | 5%~95%(non-condensing) |
| Forwarding mode | Store-and-forward |
| Switching capacity | 1.6Gbps |
| Packet forwarding rate | 1.1904M bps |
| MAC address table | 1K |
| Buffer | 48K |
| Forwarding delay | <5us |
| Reverse polarity | Supported |
| Flow control | Supported |
| Jumbo frame | Supports 10KBytes |
| Network topology | Supports ring, star, bus, and tree topologies, among others |
| Network standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x |
| Protection rating | IP30 |
| Housing | Quality metal, strong heat dissipation |
| Housing dimensions | 122.14*54.34*24.5mm (L × W × H, excluding protrusions) |
| Weight | 0.18g/ unit |
| Note | The panel appearance is subject to the physical product |
FW-093 Product Notice
This product belongs to the F-tone Networks FW-093 series. For detailed information, please contact our sales team.
Important Notice
Performance figures, data and any illustrative material provided on this page are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement, specifications may change without notice.
The publication of information on this page does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Contact Us
For pricing, datasheets and OEM/ODM inquiries, contact the F-tone Networks sales team: betty@f-tone.com / una@f-tone.com · WhatsApp: +86 17360698946 (Betty), +86 17761163895 (Una)