OS2 MPO/MTP Trunk Cable, 8/12/16/24F, APC
F-tone Networks OS2 MPO/MTP Trunk Cable, 8/12/16/24F, APC. Official English source parameters, typical values only. Ask Betty or Una. Typical values must be…
Reference model FW-096-OS2-MPO-MTP-TRUNK-CABLE-8-12-16-24F-APC in your inquiry. Datasheets are confirmed offline before order. Full specifications ↓
Technical parameters
| Specifications coming soon. |
Product details
OS2 MPO/MTP trunk cable is designed for high-density single-mode fiber connections in data centers, telecom networks, and backbone cabling systems. Available with 8, 12, 16, or 24 fibers, APC polished connectors, Type A/B/C polarity, male or female connector gender options, and custom lengths.
High-Density Single-Mode MPO/MTP Trunk Cable OS2 MPO/MTP trunk cables are factory-terminated multi-fiber cable assemblies for long-distance, high-density optical cabling. With one compact MPO/MTP interface, multiple fibers can be connected through a single connector, helping reduce installation time, improve cabling density, and simplify cable management in data center and telecom environments. This OS2 single-mode MPO/MTP trunk cable is available in 8, 12, 16, and 24 fiber counts. APC polished connectors help reduce back reflection and support stable optical performance in high-speed transmission systems. can customize fiber count, polarity, connector gender, cable jacket, cable length, and labeling according to project requirements.
Basic Specification Optical Performance & Testing Key Features Designed for Easier Installation and Reliable Link Performance The following features explain the practical value of MPO/MTP trunk cables in high-density cabling projects, including cabling efficiency, polarity mapping, connector matching and installation readiness. Polarity Mapping for Different Link Designs Different network layouts may require different polarity mapping. can provide Type A, Type B, Type C or customized polarity according to transceiver, cassette, patch panel or backbone cabling design. Male and Female MPO/MTP Connector Matching Correct connector gender selection helps ensure proper mechanical alignment and avoids mismatch during installation. Male connectors have guide pins, while female connectors are without pins. Testing Process Before Shipment MPO/MTP cable assemblies can be tested before shipment to reduce installation errors and on-site troubleshooting. Test items may include insertion loss, return loss, polarity verification and end-face inspection.
OS2 MPO/MTP trunk cables are used in long-distance, high-density single-mode cabling systems where reliable optical performance, clean cable management, and fast deployment are required. Data center backbone cabling between racks, patch panels and equipment areas Telecom equipment room interconnection and optical distribution systems High-density patch panel systems and pre-terminated cabling deployment 100G / 200G / 400G optical links depending on system design Enterprise core network and cloud computing infrastructure
Parameters and any table below are taken from the official English source page and are typical values only. The inquiry code on this page is an inquiry code, not a confirmed factory part number.
| Product Type | MPO-MPO Jumper | Fiber Count | 8F / 12F / 16F / 24F |
|---|---|---|---|
| Connector A | MPO / MTP Male or Female | Connector B | MPO / MTP Male or Female |
| Fiber Type | OS2 9/125μm Single Mode | Polish Type | APC |
| Polarity | Type A / Type B / Type C | Cable Jacket | LSZH / PVC / OFNP / OFNR |
| Cable Diameter | 3.0mm | Cable Length | 1m / 3m / 5m / 10m / Customized |
| Insertion Loss | Standard loss / low loss available | Return Loss | APC ≥ 60dB |
| Operating Wavelength | 1310nm / 1550nm | Operating Temperature | -20°C to +70°C |
| Testing | Insertion loss, return loss, polarity verification, end-face inspection | Test Report | Available upon request |
| 01 | 02 | 03 | 04 |
|---|---|---|---|
| High-Density Connection | Low-Loss Performance | Flexible Configuration | Factory Tested |
| One compact MPO/MTP interface supports multiple fibers for efficient backbone cabling. | Standard loss and low loss options are available for different optical link budgets. | Fiber count, polarity, gender, jacket and length can be customized for project needs. | IL/RL, polarity and end-face inspection can be provided before shipment. |
FW-096 Product Notice
This product belongs to the F-tone Networks FW-096 series. For detailed information, please contact our sales team.
Important Notice
Performance figures, data and any illustrative material provided on this page are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement, specifications may change without notice.
The publication of information on this page does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Contact Us
For pricing, datasheets and OEM/ODM inquiries, contact the F-tone Networks sales team: betty@f-tone.com / una@f-tone.com · WhatsApp: +86 17360698946 (Betty), +86 17761163895 (Una)
More in Fiber Cables & Patch Cords

Cat5e 110-to-110 Patch Cable, 1 Pair, 1m
View details →
Cat5e 110-to-RJ45 Patch Cable, 1 Pair, 1m
View details →MTP-16 OS2 Elite Trunk, 16 Fibres, 1m
View details →
MTP-12 OS2 Elite Trunk, 12 Fibres, 1m
View details →MTP-16 OM4 Elite Trunk, 16 Fibres, 1m
View details →
MTP-12 OM4 Trunk Cable, 12 Fibres, 1m
View details →MTP to 6× LC UPC OM4 Breakout, 12F, 1m
View details →MTP-12 APC OM4 Trunk, 12 Fibres, 1m
View details →
MTP to 4× LC UPC OM3 Breakout, 8F, 1m
View details →MTP to 6× LC UPC OM3 Breakout, 12F, 1m
View details →
MTP to 4× LC UPC OM4 Breakout, 8F, 1m
View details →MTP to 4× LC UPC OS2 Breakout, 8F, 1m
View details →MTP to 12× SC UPC OS2 Breakout, 24F, 1m
View details →MTP to 12× LC UPC OS2 Breakout, 24F, 1m
View details →MTP to 12× SC UPC OM4 Breakout, 24F, 1m
View details →