Int.Mini SAS HD 4i STR
F-tone Networks Int.Mini SAS HD 4i STR. Small size design pitch 0.8mm; Mating force 150N maximum; Unmating force 50N maximum. Official English source paramet…
- Small size design
- pitch 0.8mm
- Mating force
- 150N maximum
- Unmating force
- 50N maximum
- Rated durability cycles
- 250 cycles minimum
- Voltage
- 30VAC per contact
- Current
- 1.0A per contact
Reference model FW-087-INT-MINI-SAS-HD-4I-STR in your inquiry. Datasheets are confirmed offline before order. Full specifications ↓
Technical parameters
| Small size design | pitch 0.8mm |
|---|---|
| Mating force | 150N maximum |
| Unmating force | 50N maximum |
| Rated durability cycles | 250 cycles minimum |
| Voltage | 30VAC per contact |
| Current | 1.0A per contact |
| Dielectric Withstanding Voltage | 300 VDC minimum for 100 ms |
| Insulation Resistance | 10 MΩ minimum between adjacent pins |
| RoHS2.0 | Compliant |
| China RoHS | Yes |
| Reach Svhc | Yes |
| Low-Halogen Status | Not Reviewed |
| Model | Int.Mini SAS HD 4i STR |
Product details
Product Description: Mini SAS HD 4i/36pos Straight Plug Series: Internal Mini SAS HD Cable Length: 1.0 Meter Signal Wire Size: 30AWG Lock to mating part: With Latch Plating: Au 30u" min on contact area Connector Color:Black Environmental Compliance: RoHS Flammability: PCB UL94V-0, thermoplastic resin UL94V-0
Official English source features include: Compliance with SFF-8613/ 8643/8673 standard; 4i(36pos)and 8i(72pos) connector type, and support straight, right angle and side exit; Supports 100 & 85 ohm impedance applications; 30-34AWG are available for both discrete and ribbon cable.
Applications listed on the official English page: Data center & Networking Equipment; Servers/Storage Devices; SAS/SATA/PCIe HBA Interfaces; Switches/Routers; Wireless Base Stations and Radios.
Parameters and any table below are taken from the official English source page and are typical values only. The inquiry code on this page is an inquiry code, not a confirmed factory part number.
| Small size design | pitch 0.8mm |
|---|---|
| Mating force | 150N maximum |
| Unmating force | 50N maximum |
| Rated durability cycles | 250 cycles minimum |
| Voltage | 30VAC per contact |
| Current | 1.0A per contact |
| Dielectric Withstanding Voltage | 300 VDC minimum for 100 ms |
| Insulation Resistance | 10 MΩ minimum between adjacent pins |
| RoHS2.0 | Compliant |
| China RoHS | Yes |
| Reach Svhc | Yes |
| Low-Halogen Status | Not Reviewed |
| Model | Int.Mini SAS HD 4i STR |
FW-087 Product Notice
This product belongs to the F-tone Networks FW-087 series. For detailed information, please contact our sales team.
Important Notice
Performance figures, data and any illustrative material provided on this page are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement, specifications may change without notice.
The publication of information on this page does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Contact Us
For pricing, datasheets and OEM/ODM inquiries, contact the F-tone Networks sales team: betty@f-tone.com / una@f-tone.com · WhatsApp: +86 17360698946 (Betty), +86 17761163895 (Una)