Industrial Gigabit 2-Fiber 8-Copper Ring Switch
F-tone Networks industrial Gigabit 2-fiber 8-copper ring switch, DC 9–56 V, IP40, -40 ℃ to 85 ℃. Ask Betty or Una. Typical values must be confirmed in writin…
- Ethernet standards
- IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE802.3az, IEEE802.3ah, IEEE802.1X, IEEE802.1Q
- Buffer
- 4 Mbits
- Maximum frame
- 10 K Bytes
- MAC addresses
- 8 K
- Forwarding mode
- Store-and-forward and cut-through (full / half duplex)
- Switching performance
- Latency: < 7 μs; backplane bandwidth: 20 Gbps
Reference model FW-093-INDUSTRIAL-GIGABIT-2F-8E-RING-SWITCH in your inquiry. Datasheets are confirmed offline before order. Full specifications ↓
Technical parameters
| Ethernet standards | IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE802.3az, IEEE802.3ah, IEEE802.1X, IEEE802.1Q |
|---|---|
| Buffer | 4 Mbits |
| Maximum frame | 10 K Bytes |
| MAC addresses | 8 K |
| Forwarding mode | Store-and-forward and cut-through (full / half duplex) |
| Switching performance | Latency: < 7 μs; backplane bandwidth: 20 Gbps |
| SFP port transmission distance | Depends on the optical module |
| RJ45 copper transmission distance | 100 m (standard CAT5/CAT5e cable) |
| Supply current | 0.2/0.1 A |
| Operating voltage | DC 9–56 V |
| Overvoltage protection | Supported |
| Reverse-polarity protection | Supported |
| Power consumption | Full load <15 W |
| PoE standard | IEEE 802.3af/at, PSE |
| PoE power | Up to 30 W per port |
| PoE pinout | 1/2 (+), 3/6 (−), end-span |
| Housing material | Metal |
| Cooling | Natural cooling, fanless design |
| Dimensions | 138 mm × 108 mm × 49 mm (L × W × H) |
| Mounting | DIN rail / wall mount |
| Weight | 600 g |
| Operating temperature | -40 ℃ to 85 ℃ |
| Relative humidity | 5%–90% (non-condensing) |
| Storage temperature | -40 ℃ to 85 ℃ |
| MTBF | 500,000 hours |
| Warranty | 5-year warranty, lifetime maintenance |
| EMI | FCC Part 15 B Class A, EN 55022 Class A |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Drop | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Protection rating (official description) | IP40 |
| Port configuration (official description) | Up to 2 Gigabit fiber ports and 8 Gigabit copper ports |
| Ring recovery (official description) | ITU-T G.8032 ERPS, recovery time < 20 ms |
| Redundant power (official description) | Redundant dual power, DC/AC options |
| Official series designation | GW-GDX928 ring-network industrial Ethernet switch series |
Product details
F-tone Networks Industrial Gigabit 2-Fiber 8-Copper Ring Switch is an industrial Ethernet ring switch for industrial control networks. The official source places it in the GW-GDX928 ring-network industrial Ethernet switch series and describes support for up to 2 Gigabit fiber ports and 8 Gigabit copper ports. It supports STP/RSTP/MSTP under the IEEE 802.3D/W/S designation printed on the official source, together with ITU-T G.8032 ERPS and a stated ring recovery time of less than 20 ms. The official source also describes redundant dual power with DC/AC options, reverse-polarity and over-current protection, fanless operation, DIN-rail or wall mounting, and an IP40 metal housing. Official parameters below are typical values and must be confirmed in writing before any order.
| Ethernet standards | IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE802.3az, IEEE802.3ah, IEEE802.1X, IEEE802.1Q |
|---|---|
| Buffer | 4 Mbits |
| Maximum frame | 10 K Bytes |
| MAC addresses | 8 K |
| Forwarding mode | Store-and-forward and cut-through (full / half duplex) |
| Switching performance | Latency: < 7 μs; backplane bandwidth: 20 Gbps |
| SFP port transmission distance | Depends on the optical module |
| RJ45 copper transmission distance | 100 m (standard CAT5/CAT5e cable) |
| Supply current | 0.2/0.1 A |
| Operating voltage | DC 9–56 V |
| Overvoltage protection | Supported |
| Reverse-polarity protection | Supported |
| Power consumption | Full load <15 W |
| PoE standard | IEEE 802.3af/at, PSE |
| PoE power | Up to 30 W per port |
| PoE pinout | 1/2 (+), 3/6 (−), end-span |
| Housing material | Metal |
| Cooling | Natural cooling, fanless design |
| Dimensions | 138 mm × 108 mm × 49 mm (L × W × H) |
| Mounting | DIN rail / wall mount |
| Weight | 600 g |
| Operating temperature | -40 ℃ to 85 ℃ |
| Relative humidity | 5%–90% (non-condensing) |
| Storage temperature | -40 ℃ to 85 ℃ |
| MTBF | 500,000 hours |
| Warranty | 5-year warranty, lifetime maintenance |
| EMI | FCC Part 15 B Class A, EN 55022 Class A |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Drop | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Protection rating (official description) | IP40 |
| Port configuration (official description) | Up to 2 Gigabit fiber ports and 8 Gigabit copper ports |
| Ring recovery (official description) | ITU-T G.8032 ERPS, recovery time < 20 ms |
| Redundant power (official description) | Redundant dual power, DC/AC options |
| Official series designation | GW-GDX928 ring-network industrial Ethernet switch series |
| Redundant networking | STP/RSTP; EAPS, ERPS |
|---|---|
| Multicast | IGMP Snooping V1/V2/V3; GMRP |
| VLAN | IEEE 802.1Q 4K VLAN; QINQ |
| Link aggregation | Manual aggregation; static/dynamic LACP |
| QoS | CoS, DSCP, 8 queues; WRR, SP, WFQ scheduling; policy QoS |
| PoE management | Total power control; PoE on/off; port power sequencing |
| Diagnostics and maintenance | Port mirroring; Syslog; Ping |
| Management | CLI, web, and SNMP |
| Alarm management | One relay alarm; ROMN management; TRAP alarms |
| Security | DHCP Snooping, Option 82, 802.1X, user-level management, ACL, DDOS protection, port-based MAC filtering/binding |
| Port management | Port enable/disable, rate setting, IEEE 802.3x flow control, port name change |
| Indicator | State | Meaning |
|---|---|---|
| Power indicator (PWR) | Steady on | Normal |
| Power indicator (PWR) | Off | No power |
| Fiber indicator (LK/ACT) | Steady on | Fiber link normal |
| Fiber indicator (LK/ACT) | Flashing | Fiber data transmission |
| Fiber indicator (LK/ACT) | Off | Fiber not linked |
| Copper indicator (yellow) | Steady on | Copper link normal |
| Copper indicator (yellow) | Flashing | Copper data transmission |
| Copper indicator (yellow) | Off | Copper not linked |
| Copper indicator (green) | Steady on | Copper at Gigabit rate |
| Copper indicator (green) | Off | Copper at 10M or 100M |
Official DC terminal wiring steps: insert the positive and negative DC conductors into the V+/V− terminals; tighten the clamp with a flat screwdriver so the DC wires cannot loosen; then insert the phoenix terminal block into the terminal socket on the top panel of the switch.
FW-093 Product Notice
This product belongs to the F-tone Networks FW-093 series. For detailed information, please contact our sales team.
Important Notice
Performance figures, data and any illustrative material provided on this page are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement, specifications may change without notice.
The publication of information on this page does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Contact Us
For pricing, datasheets and OEM/ODM inquiries, contact the F-tone Networks sales team: betty@f-tone.com / una@f-tone.com · WhatsApp: +86 17360698946 (Betty), +86 17761163895 (Una)