Industrial 100M1-Fiber 4-Copper Transceiver
F-tone Networks Industrial 100M1-Fiber 4-Copper Transceiver. Official parameters are typical values and must be confirmed in writing. Ask Betty or Una.
- Product type
- industrial DIN-rail Transceiver
- Port description
- 1 × 100M fiber ports +4 × 10/100M copper ports
- Input voltage
- DC 5 -80V
- Power consumption
- Full load <5W
- MTBF
- 100,000 hours
- Operating / storage temperature
- -40℃~+85℃
Reference model FW-093-INDUSTRIAL-100M-1-FIBER-4-COPPER-TRANSCEIVER in your inquiry. Datasheets are confirmed offline before order. Full specifications ↓
Technical parameters
| Product type | industrial DIN-rail Transceiver |
|---|---|
| Port description | 1 × 100M fiber ports +4 × 10/100M copper ports |
| Input voltage | DC 5 -80V |
| Power consumption | Full load <5W |
| MTBF | 100,000 hours |
| Operating / storage temperature | -40℃~+85℃ |
| Relative humidity | 5~95 ( non-condensing) |
| PoE power supply | not including (Supportedadd ) |
| Protection | power-supply section ( differential-mode immunity 2KV , common-mode immunity 4KV ); network-port section ( differential-mode immunity 3KV , common-mode immunity 6KV); ESD protection 8KV-15KV |
| Forwarding mode | Store-and-forward |
| Switching capacity | 1G |
| Packet forwarding rate | 0.744M pps |
| MAC address table | 1K |
| Forwarding delay | <5us |
| Reverse polarity | Supported |
| Flow control | Supported |
| Jumbo frame | Supports 10KBytes |
| Network topology | Supports ring, star, bus, and tree topologies, among others |
| Network standards | IEEE802.3 , IEEE802.3u, IEEE802.3ab, IEEE802.3x |
| Protection rating | IP40 |
| Free fall | 0.5m |
| ESD immunity | IEC 61000-4-2 ( 8K/15K ) |
| Port surge protection | IEC61000-4-5 ( 6KV/3KV )( 10/700us voltage waveform) |
| Power surge protection | IEC61000-4-5(4KV/2KV)(1.2/50us, 8/20uscombination wave) |
| Housing dimensions | 103X77X32mm ( L × W × H, excluding protrusions) |
| Mounting | standard DIN35 DIN rail |
| Product model | GW-CGDX7104E |
| Power supply | DC 5 -80V |
| Dimensions | 103X77X32mm ( L × W × H, excluding protrusions) |
| Weight | 263.4G / unit |
| Buffer | 1M |
Product details
F-tone Networks Industrial 100M1-Fiber 4-Copper Transceiver is presented from the official source page. Official parameters below are typical values from the official source and must be confirmed in writing before any order.
| Product type | industrial DIN-rail Transceiver |
|---|---|
| Port description | 1 × 100M fiber ports +4 × 10/100M copper ports |
| Input voltage | DC 5 -80V |
| Power consumption | Full load <5W |
| MTBF | 100,000 hours |
| Operating / storage temperature | -40℃~+85℃ |
| Relative humidity | 5~95 ( non-condensing) |
| PoE power supply | not including (Supportedadd ) |
| Protection | power-supply section ( differential-mode immunity 2KV , common-mode immunity 4KV ); network-port section ( differential-mode immunity 3KV , common-mode immunity 6KV); ESD protection 8KV-15KV |
| Forwarding mode | Store-and-forward |
| Switching capacity | 1G |
| Packet forwarding rate | 0.744M pps |
| MAC address table | 1K |
| Forwarding delay | <5us |
| Reverse polarity | Supported |
| Flow control | Supported |
| Jumbo frame | Supports 10KBytes |
| Network topology | Supports ring, star, bus, and tree topologies, among others |
| Network standards | IEEE802.3 , IEEE802.3u, IEEE802.3ab, IEEE802.3x |
| Protection rating | IP40 |
| Free fall | 0.5m |
| ESD immunity | IEC 61000-4-2 ( 8K/15K ) |
| Port surge protection | IEC61000-4-5 ( 6KV/3KV )( 10/700us voltage waveform) |
| Power surge protection | IEC61000-4-5(4KV/2KV)(1.2/50us, 8/20uscombination wave) |
| Housing dimensions | 103X77X32mm ( L × W × H, excluding protrusions) |
| Mounting | standard DIN35 DIN rail |
| Product model | GW-CGDX7104E |
| Power supply | DC 5 -80V |
| Dimensions | 103X77X32mm ( L × W × H, excluding protrusions) |
| Weight | 263.4G / unit |
| Buffer | 1M |
FW-093 Product Notice
This product belongs to the F-tone Networks FW-093 series. For detailed information, please contact our sales team.
Important Notice
Performance figures, data and any illustrative material provided on this page are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement, specifications may change without notice.
The publication of information on this page does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Contact Us
For pricing, datasheets and OEM/ODM inquiries, contact the F-tone Networks sales team: betty@f-tone.com / una@f-tone.com · WhatsApp: +86 17360698946 (Betty), +86 17761163895 (Una)