16-Ch Video, Data & Ethernet, SM 20 km
F-tone Networks 16-ch video mux with bidirectional data and Ethernet on SM fiber to 20 km, Chinese-source listing. FC optical, 10/100 Mb RJ45. Ask Betty or Una.
- VIDEO
- CONNECTORS
- Number of Channels
- 1, 2, 4, 8, 16 optional
- Video
- 75Ω BNC (Gold Center Pin)
- Input/output impedance
- BNC 75Ω
- Optical
- FC Standard; ST/SC optional
- Input/output Compatibility
- PAL,NTSC,SECAM
Reference model FT-921 in your inquiry. Datasheets are confirmed offline before order. Full specifications ↓
Technical parameters
| VIDEO | CONNECTORS |
|---|---|
| Number of Channels | 1, 2, 4, 8, 16 optional |
| Video | 75Ω BNC (Gold Center Pin) |
| Input/output impedance | BNC 75Ω |
| Optical | FC Standard; ST/SC optional |
| Input/output Compatibility | PAL,NTSC,SECAM |
| Audio | Terminal Block |
| Input/output voltage | 1.0 Volt p-p |
| Data | Terminal Block |
| Bandwidth | 20Hz~20KHz |
| Standalone power | Screw terminal block |
| Bit Resolution | 24-Bit |
| Rack Power | AC line card |
| Differential Gain | < 1.5% | ELECTRICAL & MECHANICAL |
| Differential Phase | < 1.5° |
| Input Power Requirements | DC 5V@2A |
| Tilt | < 5% |
| Power Adapter | AC 100V~240V |
| Signal-to-Noise Ratio(SNR) | > 67 dB |
| Power Consumption | < 3W |
| AUDIO | Bit Error Rate | 1.00E-08 |
| Audio in/output impedance | 600Ω Unbalanced |
| Audio in/output Level | 6 dBm |
| Interface Port | RJ45 |
| Signal-to-Noise Ratio (SNR) | >80 dB |
| Data Formats | RS485(2-wire or 4-wire), RS232, RS422, Contact Closure |
| Data Rate | 10/100 Mbps |
| Bit Error Rate | 1.00E-08 |
| ENVIRONMENTAL | ETHERNET/IP |
| Operating Temperature | -45 °C~ +75 °C |
| Standard | Ethernet IEEE 802.3 (Auto-Negotiation) |
| Relative Humidity | 0%~95% (non-condensing) |
| Storage Temperature | -45 °C~ +85 °C |
| Connector | RJ-45, Auto MDI/MDI-X |
| MTBF | >100,000 hours |
Product details
This Chinese-titled listing covers sixteen video channels plus one bidirectional data path and Ethernet over single-mode fiber to 20 km. Video faces are 75 Ω BNC with a gold center pin, PAL/NTSC/SECAM, 1.0 V p-p; differential gain is <1.5%, phase <1.5°, tilt <5%, and video SNR is >67 dB. The optical face is FC as standard, with ST/SC optional. Data uses a terminal block and supports RS-485 (2-wire or 4-wire), RS-232, RS-422 and contact closure, at a bit error rate of 1.00×10⁻⁸. Ethernet is IEEE 802.3 auto-negotiation on RJ-45 with Auto MDI/MDI-X, at 10/100 Mbps. Standalone power is a screw terminal at DC 5 V @ 2 A; a rack uses an AC line card, and the adapter is AC 100–240 V, with consumption under 3 W. The operating window is -45 °C to +75 °C, storage -45 °C to +85 °C, humidity 0%–95% non-condensing, and MTBF >100,000 hours. A family 1–16 channel list, 20 Hz–20 kHz / 24-bit cells that read as audio, and unused audio rows are omitted. Nec is listed as a compatible brand.
Key Features
- Sixteen video channels plus bidirectional data and Ethernet, as titled
- Single-mode fiber to 20 km; FC standard, ST/SC optional
- BNC 75 Ω gold pin, PAL/NTSC/SECAM, video SNR >67 dB
- RS-485/232/422 and contact closure; BER 1.00×10⁻⁸
- 10/100 Mbps RJ-45, IEEE 802.3 auto-negotiation; DC 5 V @ 2 A, <3 W
Applications
- Chinese-source ordering of a 16-channel video-plus-data-and-Ethernet mux
- Single-mode 20 km camera trunks that also need serial data and Fast Ethernet
Specifications
| Parameter | Value |
|---|---|
| Video Connector | 75 Ω BNC (gold center pin) |
| Input/Output Impedance | BNC 75 Ω |
| Optical Connector | FC standard; ST/SC optional |
| Input/Output Compatibility | PAL, NTSC, SECAM |
| Input/Output Voltage | 1.0 V p-p |
| Data Interface | Terminal block |
| Standalone Power | Screw terminal block |
| Rack Power | AC line card |
| Differential Gain | < 1.5% |
| Differential Phase | < 1.5° |
| Input Power Requirements | DC 5 V @ 2 A |
| Tilt | < 5% |
| Power Adapter | AC 100–240 V |
| Video Signal-to-Noise Ratio | >67 dB |
| Power Consumption | < 3 W |
| Interface Port | RJ45 |
| Data Formats | RS-485 (2-wire or 4-wire), RS-232, RS-422, contact closure |
| Data Rate | 10/100 Mbps |
| Bit Error Rate | 1.00×10⁻⁸ |
| Operating Temperature | -45 °C to +75 °C |
| Standard | Ethernet IEEE 802.3 (auto-negotiation) |
| Relative Humidity | 0%–95% (non-condensing) |
| Storage Temperature | -45 °C to +85 °C |
| Connector | RJ-45, Auto MDI/MDI-X |
| MTBF | >100,000 hours |
| Compatible Brands | Nec |
Ordering References
Model and part numbers for ordering reference:
| Reference | Description |
|---|---|
| FT-921 | F-tone part number |
Contact Us
For pricing, datasheets and OEM/ODM inquiries, contact the F-tone Networks sales team: betty@f-tone.com / una@f-tone.com · WhatsApp: +86 17360698946 (Betty), +86 17761163895 (Una)
Compatible platforms
More in Products

Cat5e 110-to-110 Patch Cable, 1 Pair, 1m
View details →
Cat5e 110-to-RJ45 Patch Cable, 1 Pair, 1m
View details →OS2 Simplex SC APC to SC APC Patch, 1m
View details →
18G HDMI Active Optical Cable, 1m
View details →OS2 Simplex LC UPC to LC UPC Patch, 1m
View details →
OS2 Simplex LC UPC to ST UPC Patch, 1m
View details →
OS2 Simplex LC UPC to FC UPC Patch, 1m
View details →OS2 Simplex LC APC to LC APC Patch, 1m
View details →OS2 Simplex LC APC to SC APC Patch, 1m
View details →MTP-16 OS2 Elite Trunk, 16 Fibres, 1m
View details →800G OSFP224 Passive Twinax DAC, 1m
View details →
MTP-12 OS2 Elite Trunk, 12 Fibres, 1m
View details →MTP-16 OM4 Elite Trunk, 16 Fibres, 1m
View details →