192-Channel Telephone Fiber Converter, 4U, RJ11 FXO/FXS
F-tone Networks 192-channel telephone fiber converter, 4U, RJ11 FXO/FXS, from a Chinese title. Optional AC220 / DC-48 / DC+24. See table. Ask Betty or Una.
- 光口:
- 1,2(1+1 光备份)
- 光口速率:
- 3.125G
- 光纤:
- 单纤双纤
- 光纤接口:
- FC/SC/ST/LC(SFP)
- 波长:
- 850nm/1310nm多模;1310nm/1550nm单模
- 无中继传输距离:
- 20~120Km
Reference model FT-114 in your inquiry. Datasheets are confirmed offline before order. Full specifications ↓
Technical parameters
| 光口: | 1,2(1+1 光备份) |
|---|---|
| 光口速率: | 3.125G |
| 光纤: | 单纤双纤 |
| 光纤接口: | FC/SC/ST/LC(SFP) |
| 波长: | 850nm/1310nm多模;1310nm/1550nm单模 |
| 无中继传输距离: | 20~120Km |
| 典型发射功率: | 单模1310/1550nm:≥-9dBm 多模850nm:-18dBm 多模1310nm: -25dBm |
| 接受灵敏度范围: | -28dBm~- 40dBm |
| 协 议 | 符合IEEE 802.3ab,IEEE 802.3z |
| 速 率 | 10/100/1000M自适应m全/半双工自适应 |
| MAC地址表 | 可以学习4096个MAC地址 |
| 物理接口 | FJ45座 支持Auto-MDIX |
| 设备接口: | 设备接口符合G.703建议 |
| 速 率: | 2048Kb/s±50ppm |
| 码 型: | HDB3 |
| 阻 抗: | 非平衡式75Ω/平衡式120Ω(非平衡式配同轴接口适配器,可适配75-2/3同轴电缆) |
| 抖动特性: | 满足G.742、G.823建议 |
| 输入口允许衰减 | 0~6dBm |
| 振铃电压: | 75V |
| 振铃频率: | 25Hz |
| 二线输入阻抗 | 600Ω(摘机) |
| 回损 | 20dB |
| 振铃检测电压: | 35V |
| 振铃检测频率: | 17Hz-60Hz |
| 二线输入阻抗: | 600Ω(摘机) |
| 回损: | 20dB |
| E&M类型 | TYPE V |
| E线最大电流 | 22mA;饱和电压:3V |
| M线恒定电流 | 7mA; 最小检测电流:5mA |
| AD增益 | 0dB |
| DA增益 | 0dB |
| 2/4线输入阻抗 | 600Ω |
| 工作温度: | -10℃—+60℃ |
| 储存温度: | -40℃—+85℃ |
| 工作湿度: | 0%—95%(无凝结) |
| MTBF: | >100,000小时 |
| 产品功能描述 | 在光纤上传输192路RJ11电话(FXO/FXS),4U19英寸机架,-48V或AC220V双电源(可选) |
| 业务端口描述 | 192路RJ11电话接口(由8个功能板组成);带2个光口卡片1个 |
| 电源 | AC220V / DC-48V / DC+24V(电源可选) |
| 产品尺寸 | (长×宽×高) 443*365*195mm机架式 |
| 重量 | 12.5Kg/台 |
Product details
The Chinese heading translates to a 192-channel telephone fibre converter. Function and service-port cells describe 192 RJ11 FXO/FXS ports on a 4U 19-inch rack, built from eight function boards, with optional AC 220 V, DC -48 V or DC +24 V. Optical ports are listed as 1, or 2 with 1+1 backup, at 3.125G, on single- or dual-fibre, with FC/SC/ST/LC (SFP) and 20–120 km unrepeatered reach. The same stored sheet also carries IEEE 802.3ab/z, 10/100/1000M and a physical jack written as FJ45, plus G.703 / 2048 kb/s cells. Those Ethernet and G.703 rows are left in the table as filed and should be confirmed with sales; they are not treated as verified extra ports in this title. Outline is 443 × 365 × 195 mm; mass is 12.5 kg per unit.
Key Features
- 192-channel telephone fibre converter, RJ11 FXO/FXS, 4U, as titled
- Optional AC 220 V / DC -48 V / DC +24 V; 4U 19-inch rack
- Optical ports 1, or 2 (1+1 backup), 3.125G; 20–120 km
- Eight function boards; outline 443 × 365 × 195 mm; 12.5 kg
- Ethernet and G.703 cells appear on the sheet and should be confirmed
Applications
- Sites extending 192 analogue telephone circuits over fibre
- 4U racks that specify RJ11 FXO/FXS on a fibre converter
Specifications
| Parameter | Value |
|---|---|
| Optical Ports | 1, or 2 (1+1 optical backup) |
| Optical Port Rate | 3.125G |
| Fiber | Single-fiber or dual-fiber |
| Optical Connector | FC / SC / ST / LC (SFP) |
| Wavelength | 850 nm / 1310 nm multimode; 1310 nm / 1550 nm single-mode |
| Unrepeatered Distance | 20–120 km |
| Typical Transmit Power | Single-mode 1310/1550 nm: ≥-9 dBm; multimode 850 nm: -18 dBm; multimode 1310 nm: -25 dBm |
| Receive Sensitivity Range | -28 dBm to -40 dBm |
| Protocol | Complies with IEEE 802.3ab, IEEE 802.3z |
| Ethernet Rate | 10/100/1000M auto-negotiation, full/half-duplex auto-sensing |
| MAC Address Table | Can learn 4096 MAC addresses |
| Physical Interface | FJ45 jack, supports Auto-MDIX |
| Equipment Interface | Equipment interface complies with G.703 |
| Line Rate | 2048 kb/s ±50 ppm |
| Line Code | HDB3 |
| Impedance | Unbalanced 75 Ω / balanced 120 Ω (unbalanced uses a coaxial adapter for 75-2/3 coaxial cable) |
| Jitter | Meets G.742 and G.823 |
| Allowed Input Attenuation | 0–6 dBm |
| Ringing Voltage | 75 V |
| Ringing Frequency | 25 Hz |
| 2-Wire Input Impedance | 600 Ω (off-hook) |
| Return Loss | 20 dB |
| Ringing Detection Voltage | 35 V |
| Ringing Detection Frequency | 17 Hz–60 Hz |
| 2-Wire Input Impedance (Alt.) | 600 Ω (off-hook) |
| Return Loss (Alt.) | 20 dB |
| E&M Type | Type V |
| E-Lead Max Current | 22 mA; saturation voltage: 3 V |
| M-Lead Constant Current | 7 mA; minimum detection current: 5 mA |
| AD Gain | 0 dB |
| DA Gain | 0 dB |
| 2/4-Wire Input Impedance | 600 Ω |
| Operating Temperature | -10 °C to +60 °C |
| Storage Temperature | -40 °C to +85 °C |
| Operating Humidity | 0–95% (non-condensing) |
| MTBF | >100,000 hours |
| Function | Transports 192 RJ11 telephone channels (FXO/FXS) over fiber; 4U 19-inch rack; -48 V or AC 220 V dual supply (optional) |
| Service Ports | 192 RJ11 telephone interfaces (made up of 8 function boards); listed with 2 optical-port cards, 1 piece |
| Power Supply | AC 220 V / DC -48 V / DC +24 V (power supply optional) |
| Dimensions | 443 × 365 × 195 mm (L×W×H), rack-mount |
| Weight | 12.5 kg per unit |
Ordering References
Model and part numbers for ordering reference:
| Reference | Description |
|---|---|
| FT-114 | F-tone part number |
Contact Us
For pricing, datasheets and OEM/ODM inquiries, contact the F-tone Networks sales team: betty@f-tone.com / una@f-tone.com · WhatsApp: +86 17360698946 (Betty), +86 17761163895 (Una)