32-Channel Telephone + 1-Channel 100M Ethernet
F-tone Networks 32-Channel Telephone + 1-Channel 100M Ethernet. Official parameters are typical values and must be confirmed in writing. Ask Betty or Una.
- Product name
- 32-channel telephone+1-channel 100M Ethernet
- Product function
- over fiber uplink transmission32-channel telephone(FXO/FXS/2line audio)+1-channel 10/100M Ethernet+1-channel fiber, 19 inchesRackmount, 220Vpower supply
- Power supply
- AC100-220V
- Dimensions
- ( L × W × H) 431*131*54mm Rackmount
- Weight
- 4040g/pair
- ● multiple power-supply methodsOptional
- AC220V/DC-5V, etc.
Reference model FW-093-32-CH-TELEPHONE-PLUS-1-CH-100M-ETHERNET in your inquiry. Datasheets are confirmed offline before order. Full specifications ↓
Technical parameters
| Product name | 32-channel telephone+1-channel 100M Ethernet |
|---|---|
| Product function | over fiber uplink transmission32-channel telephone(FXO/FXS/2line audio)+1-channel 10/100M Ethernet+1-channel fiber, 19 inchesRackmount, 220Vpower supply |
| Power supply | AC100-220V |
| Dimensions | ( L × W × H) 431*131*54mm Rackmount |
| Weight | 4040g/pair |
| ● multiple power-supply methodsOptional | AC220V/DC-5V, etc. |
| Transmission distance | 2Km multimodefiber, attenuation(3dbm/km ) |
| Wavelength | 850nm |
| Transmit power | -12dBm (M in) ~ -9dBm (M ax) |
| Receive sensitivity | -28dBm (M in) |
| Link budget | 16dBm |
| Ringing voltage | 75V |
| Ringing frequency | 25Hz |
| Two-wire input impedance | 600Ω(off-hook) |
| Return loss | 20dB |
| Ring-detection voltage | 35V |
| Ring-detection frequency | 17Hz-60Hz |
| Protocol | Complies with IEEE 802.3, IEEE 802.1Q(VLAN) |
| Rate | 10/100M auto-sensing , half/full duplex auto-sensing |
| MAC address table | can learn 4096 × M ACaddress |
| Physical -Port | RJ45 jack, SupportedAuto-M DIX(crossover /straight-through cableauto-sensing ) |
| Operating temperature | -10℃—+60℃ |
| Storage temperature | -40℃—+85℃ |
| Operating humidity | 0%—95%(non-condensing) |
| MTBF | >100,000 hours |
| systempower supply | AC180V ~260V;DC –48V;DC +24V |
| Power consumption | ≤5W |
| Housing dimensions | (L × W × H) 431*131*54mm Rackmount |
| Note | The panel appearance is subject to the physical product |
Product details
F-tone Networks 32-Channel Telephone + 1-Channel 100M Ethernet is presented from the official source page. Official parameters below are typical values from the official source and must be confirmed in writing before any order.
| Product name | 32-channel telephone+1-channel 100M Ethernet |
|---|---|
| Product function | over fiber uplink transmission32-channel telephone(FXO/FXS/2line audio)+1-channel 10/100M Ethernet+1-channel fiber, 19 inchesRackmount, 220Vpower supply |
| Power supply | AC100-220V |
| Dimensions | ( L × W × H) 431*131*54mm Rackmount |
| Weight | 4040g/pair |
| ● multiple power-supply methodsOptional | AC220V/DC-5V, etc. |
| Transmission distance | 2Km multimodefiber, attenuation(3dbm/km ) |
| Wavelength | 850nm |
| Transmit power | -12dBm (M in) ~ -9dBm (M ax) |
| Receive sensitivity | -28dBm (M in) |
| Link budget | 16dBm |
| Ringing voltage | 75V |
| Ringing frequency | 25Hz |
| Two-wire input impedance | 600Ω(off-hook) |
| Return loss | 20dB |
| Ring-detection voltage | 35V |
| Ring-detection frequency | 17Hz-60Hz |
| Protocol | Complies with IEEE 802.3, IEEE 802.1Q(VLAN) |
| Rate | 10/100M auto-sensing , half/full duplex auto-sensing |
| MAC address table | can learn 4096 × M ACaddress |
| Physical -Port | RJ45 jack, SupportedAuto-M DIX(crossover /straight-through cableauto-sensing ) |
| Operating temperature | -10℃—+60℃ |
| Storage temperature | -40℃—+85℃ |
| Operating humidity | 0%—95%(non-condensing) |
| MTBF | >100,000 hours |
| systempower supply | AC180V ~260V;DC –48V;DC +24V |
| Power consumption | ≤5W |
| Housing dimensions | (L × W × H) 431*131*54mm Rackmount |
| Note | The panel appearance is subject to the physical product |
FW-093 Product Notice
This product belongs to the F-tone Networks FW-093 series. For detailed information, please contact our sales team.
Important Notice
Performance figures, data and any illustrative material provided on this page are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement, specifications may change without notice.
The publication of information on this page does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Contact Us
For pricing, datasheets and OEM/ODM inquiries, contact the F-tone Networks sales team: betty@f-tone.com / una@f-tone.com · WhatsApp: +86 17360698946 (Betty), +86 17761163895 (Una)