16+2+1 Uplink Gigabit PoE Switch Rackmount
F-tone Networks 16+2+1 Uplink Gigabit PoE Switch Rackmount. Official parameters are typical values and must be confirmed in writing. Ask Betty or Una.
- Product type
- Uplink Gigabit PoE Ethernet switch
- Port description
- 16 × 10/100M PoE copper ports+2 × 10/100/1000M uplink copper ports+1 × 1000M uplink SFP fiber port
- Input voltage
- AC 176V~264V
- Power consumption
- Full load <260W
- MTBF
- 100,000 hours
- Operating / storage temperature
- -10℃~+70℃
Reference model FW-093-16-PLUS-2-PLUS-1-UPLINK-GIGABIT-POE-SWITCH-RACK in your inquiry. Datasheets are confirmed offline before order. Full specifications ↓
Technical parameters
| Product type | Uplink Gigabit PoE Ethernet switch |
|---|---|
| Port description | 16 × 10/100M PoE copper ports+2 × 10/100/1000M uplink copper ports+1 × 1000M uplink SFP fiber port |
| Input voltage | AC 176V~264V |
| Power consumption | Full load <260W |
| MTBF | 100,000 hours |
| Operating / storage temperature | -10℃~+70℃ |
| Relative humidity | 5%~95%(non-condensing) |
| Indicators | PWR (power indicator), red light (PoE status indicator), blue light (link/data indicator) |
| Forwarding mode | Store-and-forward |
| Switching capacity | 18.2Gbps |
| Packet forwarding rate | 13.5408M bps |
| MAC address table | 8K |
| Flow control | Supported |
| Network standards | IEEE802.3,IEEE802.3u,IEEE802.3ab,IEEE802.3x |
| Reverse polarity | Supported |
| Network topology | Supports ring, star, bus, and tree topologies, among others |
| Protection rating | IP30 |
| Housing | Quality metal, strong heat dissipation |
| Product model | GW-P1602G01GFI |
| Power supply | Built-in power supply 52V5A |
| Weight | 0.8kg |
| Dimensions | 440*136.5*44mm(excluding protrusions) |
| Packing dimensions | 512x210x101mm |
| Carton quantity | 10 units/carton |
| Switch 1 unit | power cord 1 |
| user manual 1 copy | certificate of conformity 1 × |
| Extend switch | link-extension mode, in this mode, Switch's PoE power and data transmission distance can be extended to 250 m,the transmission rate becomes 10M |
| Note | The panel appearance is subject to the physical product |
Product details
F-tone Networks 16+2+1 Uplink Gigabit PoE Switch Rackmount is presented from the official source page. Official parameters below are typical values from the official source and must be confirmed in writing before any order.
The product is designed to Ethernet PoE power-supply standards, with stable performance. It uses store-and-forward switching, automatically learns and updates MAC addresses, and is intended to improve network transmission and switching performance.As a PoE power sourcing device, it can automatically detect and identify compliant powered devices and provide power and network transmission over the Ethernet cable. Cabling is described as simple, which can reduce installation cost and improve installation efficiency. The official source states that this product is compatible with mainstream cameras and is widely used at the access, aggregation, and core layers of small and medium-sized networks, and is compatible with computers, printers, network cameras, and wireless APs, including multimedia transmission systems, network surveillance, wireless network transmission, industry dedicated broadband networks, speech recognition, smart home, and industrial automation.In these scenarios, the official source states that a PoE switch can simplify cabling, reduce cost, improve efficiency, and enable intelligent management of a home network.
| Product type | Uplink Gigabit PoE Ethernet switch |
|---|---|
| Port description | 16 × 10/100M PoE copper ports+2 × 10/100/1000M uplink copper ports+1 × 1000M uplink SFP fiber port |
| Input voltage | AC 176V~264V |
| Power consumption | Full load <260W |
| MTBF | 100,000 hours |
| Operating / storage temperature | -10℃~+70℃ |
| Relative humidity | 5%~95%(non-condensing) |
| Indicators | PWR (power indicator), red light (PoE status indicator), blue light (link/data indicator) |
| Forwarding mode | Store-and-forward |
| Switching capacity | 18.2Gbps |
| Packet forwarding rate | 13.5408M bps |
| MAC address table | 8K |
| Flow control | Supported |
| Network standards | IEEE802.3,IEEE802.3u,IEEE802.3ab,IEEE802.3x |
| Reverse polarity | Supported |
| Network topology | Supports ring, star, bus, and tree topologies, among others |
| Protection rating | IP30 |
| Housing | Quality metal, strong heat dissipation |
| Product model | GW-P1602G01GFI |
| Power supply | Built-in power supply 52V5A |
| Weight | 0.8kg |
| Dimensions | 440*136.5*44mm(excluding protrusions) |
| Packing dimensions | 512x210x101mm |
| Carton quantity | 10 units/carton |
| Switch 1 unit | power cord 1 |
| user manual 1 copy | certificate of conformity 1 × |
| Extend switch | link-extension mode, in this mode, Switch's PoE power and data transmission distance can be extended to 250 m,the transmission rate becomes 10M |
| Note | The panel appearance is subject to the physical product |
FW-093 Product Notice
This product belongs to the F-tone Networks FW-093 series. For detailed information, please contact our sales team.
Important Notice
Performance figures, data and any illustrative material provided on this page are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement, specifications may change without notice.
The publication of information on this page does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Contact Us
For pricing, datasheets and OEM/ODM inquiries, contact the F-tone Networks sales team: betty@f-tone.com / una@f-tone.com · WhatsApp: +86 17360698946 (Betty), +86 17761163895 (Una)