1550 nm Nanosecond Pulsed Laser for DTS
F-tone Networks 1550.12 nm nanosecond pulsed laser for DTS systems, typical 30 W peak, 5–120 ns pulses and 5–20 kHz repetition rate. Ask Betty or Una.
- Center Wavelength
- Typ 1550.12 nm
- Spectral Width (20dB)
- Typ 0.3 / Max 1 nm
- Output Peak Optical Power
- Typ 30 W
- Repetition Frequency
- Min 5 / Max 20 kHz
- Pulse Width
- Min 5 / Max 120 ns
- Operating Temperature
- Min -15 / Max 55 ℃
Reference model FT-1550-188 in your inquiry. Datasheets are confirmed offline before order. Full specifications ↓
Technical parameters
| Center Wavelength | Typ 1550.12 nm |
|---|---|
| Spectral Width (20dB) | Typ 0.3 / Max 1 nm |
| Output Peak Optical Power | Typ 30 W |
| Repetition Frequency | Min 5 / Max 20 kHz |
| Pulse Width | Min 5 / Max 120 ns |
| Operating Temperature | Min -15 / Max 55 ℃ |
| Storage Temperature | Min -40 / Max 85 ℃ |
| Power Consumption | Typ 6 / Max 8 W |
| Operating Voltage | Min 9 / Typ 12 / Max 13 V |
| Trigger Mode | Internal trigger (Light source triggers acquisition card) |
| Communication Interface | TTL |
| Communication Protocol | Modbus RTU Slave |
| Pigtail Type | 62.5/125 multimode fiber, FC/APC connector (or customer-specified) |
| Fiber Pigtail Length | Min ≥1 m |
| APC Mode | Yes |
Product details
A nanosecond source intended for distributed temperature sensing emits at a typical center of 1550.12 nm with a 20 dB spectral width of 0.3 nm typical and 1 nm maximum. Peak optical power is typically 30 W. Pulse width spans 5 to 120 ns and repetition rate spans 5 to 20 kHz. The unit draws typically 6 W (8 W maximum) from a 9–13 V rail (12 V typical). Triggering is internal so the source can clock an acquisition card; the electrical interface is TTL using Modbus RTU Slave. The pigtail is 62.5/125 multimode fiber with an FC/APC connector, at least 1 m long, and APC mode is listed as yes.
Key Features
- Typical center 1550.12 nm; 20 dB width 0.3 / 1 nm
- Typical peak power 30 W
- Pulse width 5–120 ns; repetition 5–20 kHz
- Supply 9–13 V, typically 12 V; 6 / 8 W draw
- TTL interface, Modbus RTU Slave protocol
- 62.5/125 multimode pigtail, FC/APC, ≥1 m
Applications
- Distributed temperature sensing (DTS) sources
- Nanosecond pulsed test beds
Specifications
| Parameter | Value |
|---|---|
| Center Wavelength | Typ 1550.12 nm |
| Spectral Width (20 dB) | Typ 0.3 / Max 1 nm |
| Output Peak Optical Power | Typ 30 W |
| Repetition Frequency | Min 5 / Max 20 kHz |
| Pulse Width | Min 5 / Max 120 ns |
| Operating Temperature | Min -15 / Max 55 ℃ |
| Storage Temperature | Min -40 / Max 85 ℃ |
| Power Consumption | Typ 6 / Max 8 W |
| Operating Voltage | Min 9 / Typ 12 / Max 13 V |
| Trigger Mode | Internal trigger (Light source triggers acquisition card) |
| Communication Interface | TTL |
| Communication Protocol | Modbus RTU Slave |
| Pigtail Type | 62.5/125 multimode fiber, FC/APC connector (or customer-specified) |
| Fiber Pigtail Length | Min ≥1 m |
| APC Mode | Yes |
Ordering References
Model and part numbers for ordering reference:
| Reference | Description |
|---|---|
| FT-1550-188 | F-tone part number |
Contact Us
For pricing, datasheets and OEM/ODM inquiries, contact the F-tone Networks sales team: betty@f-tone.com / una@f-tone.com · WhatsApp: +86 17360698946 (Betty), +86 17761163895 (Una)
More in Products

Cat5e 110-to-110 Patch Cable, 1 Pair, 1m
View details →
Cat5e 110-to-RJ45 Patch Cable, 1 Pair, 1m
View details →OS2 Simplex SC APC to SC APC Patch, 1m
View details →
18G HDMI Active Optical Cable, 1m
View details →OS2 Simplex LC UPC to LC UPC Patch, 1m
View details →
OS2 Simplex LC UPC to ST UPC Patch, 1m
View details →
OS2 Simplex LC UPC to FC UPC Patch, 1m
View details →OS2 Simplex LC APC to LC APC Patch, 1m
View details →OS2 Simplex LC APC to SC APC Patch, 1m
View details →MTP-16 OS2 Elite Trunk, 16 Fibres, 1m
View details →800G OSFP224 Passive Twinax DAC, 1m
View details →
MTP-12 OS2 Elite Trunk, 12 Fibres, 1m
View details →MTP-16 OM4 Elite Trunk, 16 Fibres, 1m
View details →