15 mW 1310 nm DFB Butterfly Laser
F-tone Networks 15 mW 1310 nm DFB butterfly laser diode. Typ 1310 nm (1300–1320), Ith typ 10 / max 15 mA, SMSR min 35 dB, isolation typ 35 dB. Ask Betty or Una.
- Operating Case Temperature
- Min -20 / Max 80 °C (I=Iop, absolute maximum); Min -20 / Max 60 °C (characteristics)
- Storage Temperature
- Min -40 / Max 85 °C
- Laser Forward Current
- Max 150 mA
- Laser Reverse Bias
- Max 2 V
- Photodiode Reverse Bias
- Max 10 V
- TEC Current
- Min -2 / Max 2 A (-20 °C < Tc < +65 °C, absolute maximum); Max 1 A (ΔT=40 °C, characteristics)
Reference model FT-1310-62 in your inquiry. Datasheets are confirmed offline before order. Full specifications ↓
Technical parameters
| Operating Case Temperature | Min -20 / Max 80 °C (I=Iop, absolute maximum); Min -20 / Max 60 °C (characteristics) |
|---|---|
| Storage Temperature | Min -40 / Max 85 °C |
| Laser Forward Current | Max 150 mA |
| Laser Reverse Bias | Max 2 V |
| Photodiode Reverse Bias | Max 10 V |
| TEC Current | Min -2 / Max 2 A (-20 °C < Tc < +65 °C, absolute maximum); Max 1 A (ΔT=40 °C, characteristics) |
| TEC Voltage | Min -2.5 / Max 2.5 V (absolute maximum); Max 2 V (ΔT=40 °C, characteristics) |
| ESD | Min -500 / Max 500 V (HBM, R=1500 ohm, C=100 pF) |
| Lead Solder Temperature | Max 260 °C |
| Lead Soldering Time | Max 10 s |
| Fiber Bend Radius | Min 30 mm |
| Fiber Yield Strength | Max 1 kgf |
| Center Wavelength | Min 1300 / Typ 1310 / Max 1320 nm (CW) |
| Spectral Width (-20 dB) | Typ 0.2 / Max 0.5 nm (CW) |
| Optical Output Power* | Max 24 mW (CW, TL=25 °C) |
| Optical Isolation | Min 30 / Typ 35 dB (T=25 °C) |
| Side-mode Suppression Ratio | Min 35 dB (CW) |
| Threshold Current | Typ 10 / Max 15 mA (TL=25 °C) |
| Operating Current | Max 120 mA (CW) |
| Forward Voltage | Typ 1.2 / Max 2 V (CW) |
| Monitor Current | Min 100 / Max 1500 μA (Vrpd=5 V) |
| Monitor Dark Current | Max 500 nA (Vrpd=5 V) |
| Tracking Error | Min -1 / Max 1 dB (TE=10log(Po(Tc)/Po(25°C))) |
| Thermistor Resistance | Min 9.5 / Max 10.5 kΩ (T=25 °C) |
| Frequency Range | Min 45 / Max 2500 MHz |
| Cut-off Frequency | Min 4 GHz (If=Iop) |
| RIN | Typ -155 / Max -150 dB/Hz (CW, If=Iop, f=2.5 GHz) |
| Carrier Noise Ratio | Min 51 dB (Note 1) |
| Composite Second Order | Typ -57 dBc |
| Composite Triple Beat | Typ -65 dBc |
| Note 1 | If=Iop, Optical Modulation Index=3.2%/channel (minimum); 60 PAL-D unmodulated carriers (47 to 550 MHz), 10 km singlemode fiber, -1 dBm received power, receiver responsivity=0.85 A/W. CNR, CSO, CTB tested at worst case over all test frequencies; NTSC 120 ch., 10 km singlemode fiber, -1 dBm received power, receiver responsivity=0.85 A/W |
Product details
This SKU is a 15 mW 1310 nm DFB butterfly laser diode, as titled. Centre wavelength is Min 1300 / Typ 1310 / Max 1320 nm under CW, with a -20 dB spectral width of typ 0.2 / max 0.5 nm. Threshold current is typ 10 / max 15 mA at TL=25 °C; operating current is max 120 mA CW; forward voltage is typ 1.2 / max 2 V CW. Side-mode suppression is at least 35 dB CW and optical isolation is min 30 / typ 35 dB at 25 °C. A monitor photodiode current of 100–1500 µA and a dark current of at most 500 nA are listed at Vrpd=5 V. Tracking error is -1 to 1 dB. Thermistor resistance at 25 °C is 9.5–10.5 kΩ. Absolute-maximum case temperature is -20 to 80 °C at I=Iop, while the characteristics table gives -20 to 60 °C; storage is -40 to 85 °C. Laser forward current is max 150 mA, with reverse-bias limits of 2 V (laser) and 10 V (photodiode). TEC current and voltage are given both as absolute maxima and as characteristics at ΔT=40 °C. Frequency range is 45–2500 MHz and cut-off frequency is at least 4 GHz at If=Iop. RIN is typ -155 / max -150 dB/Hz. CNR is at least 51 dB, CSO typ -57 dBc and CTB typ -65 dBc, under the stored Note 1 conditions. A family-table optical-power maximum of 24 mW is omitted so it is not presented as this SKU’s rated output.
Key Features
- 15 mW 1310 nm DFB butterfly laser, as titled
- Centre wavelength typ 1310 nm (1300–1320 nm CW)
- Threshold typ 10 / max 15 mA; Iop max 120 mA CW
- SMSR min 35 dB; isolation min 30 / typ 35 dB
- Built-in TEC, thermistor and monitor photodiode cells as stored
Applications
- 1310 nm CW or modulated source use listed on the datasheet
- Analog or CATV-oriented links that cite the stored CNR, CSO and CTB figures
Specifications
| Parameter | Value |
|---|---|
| Operating Case Temperature | Min -20 / Max 80 °C (I=Iop, absolute maximum); Min -20 / Max 60 °C (characteristics) |
| Storage Temperature | Min -40 / Max 85 °C |
| Laser Forward Current | Max 150 mA |
| Laser Reverse Bias | Max 2 V |
| Photodiode Reverse Bias | Max 10 V |
| TEC Current | Min -2 / Max 2 A (-20 °C < Tc < +65 °C, absolute maximum); Max 1 A (ΔT=40 °C, characteristics) |
| TEC Voltage | Min -2.5 / Max 2.5 V (absolute maximum); Max 2 V (ΔT=40 °C, characteristics) |
| ESD | Min -500 / Max 500 V (HBM, R=1500 ohm, C=100 pF) |
| Lead Solder Temperature | Max 260 °C |
| Lead Soldering Time | Max 10 s |
| Fiber Bend Radius | Min 30 mm |
| Fiber Yield Strength | Max 1 kgf |
| Center Wavelength | Min 1300 / Typ 1310 / Max 1320 nm (CW) |
| Spectral Width (-20 dB) | Typ 0.2 / Max 0.5 nm (CW) |
| Optical Isolation | Min 30 / Typ 35 dB (T=25 °C) |
| Side-mode Suppression Ratio | Min 35 dB (CW) |
| Threshold Current | Typ 10 / Max 15 mA (TL=25 °C) |
| Operating Current | Max 120 mA (CW) |
| Forward Voltage | Typ 1.2 / Max 2 V (CW) |
| Monitor Current | Min 100 / Max 1500 μA (Vrpd=5 V) |
| Monitor Dark Current | Max 500 nA (Vrpd=5 V) |
| Tracking Error | Min -1 / Max 1 dB (TE=10log(Po(Tc)/Po(25°C))) |
| Thermistor Resistance | Min 9.5 / Max 10.5 kΩ (T=25 °C) |
| Frequency Range | Min 45 / Max 2500 MHz |
| Cut-off Frequency | Min 4 GHz (If=Iop) |
| RIN | Typ -155 / Max -150 dB/Hz (CW, If=Iop, f=2.5 GHz) |
| Carrier Noise Ratio | Min 51 dB (Note 1) |
| Composite Second Order | Typ -57 dBc |
| Composite Triple Beat | Typ -65 dBc |
| Note 1 | If=Iop, Optical Modulation Index=3.2%/channel (minimum); 60 PAL-D unmodulated carriers (47 to 550 MHz), 10 km singlemode fiber, -1 dBm received power, receiver responsivity=0.85 A/W. CNR, CSO, CTB tested at worst case over all test frequencies; NTSC 120 ch., 10 km singlemode fiber, -1 dBm received power, receiver responsivity=0.85 A/W |
Ordering References
Model and part numbers for ordering reference:
| Reference | Description |
|---|---|
| FT-1310-62 | F-tone part number |
Contact Us
For pricing, datasheets and OEM/ODM inquiries, contact the F-tone Networks sales team: betty@f-tone.com / una@f-tone.com · WhatsApp: +86 17360698946 (Betty), +86 17761163895 (Una)
More in Products

Cat5e 110-to-110 Patch Cable, 1 Pair, 1m
View details →
Cat5e 110-to-RJ45 Patch Cable, 1 Pair, 1m
View details →OS2 Simplex SC APC to SC APC Patch, 1m
View details →
18G HDMI Active Optical Cable, 1m
View details →OS2 Simplex LC UPC to LC UPC Patch, 1m
View details →
OS2 Simplex LC UPC to ST UPC Patch, 1m
View details →
OS2 Simplex LC UPC to FC UPC Patch, 1m
View details →OS2 Simplex LC APC to LC APC Patch, 1m
View details →OS2 Simplex LC APC to SC APC Patch, 1m
View details →MTP-16 OS2 Elite Trunk, 16 Fibres, 1m
View details →800G OSFP224 Passive Twinax DAC, 1m
View details →
MTP-12 OS2 Elite Trunk, 12 Fibres, 1m
View details →MTP-16 OM4 Elite Trunk, 16 Fibres, 1m
View details →